What is the anti-silicone cleaner and what is it good for?

The advantage of silicone is that it is flexible, waterproof, heat-resistant and resistant to chemicals. However, the disadvantage of silicone is that it is very difficult to remove, and if it remains on the surface to be painted, it prevents the paint from adhering and causes ugly defects, such as craters or fish eyes.

Therefore, if you want to clean the surface of your car from the silicone residues before painting, you will need an anti-silicone product. The anti-silicone product is a chemical that can dissolve the silicone molecules and remove them from the surface. The use of the anti-silicone product not only improves the quality of the paint, but also extends the life of the paint, as it prevents the silicone from depositing again.

How to use the anti-silicone product

The use of the anti-silicone product is not complicated, but it is important to follow the safety instructions and wear appropriate protective equipment, such as gloves, glasses and mask. The anti-silicone product can be flammable, corrosive and harmful to health, so avoid fire, sparks, open flames and hot surfaces, as well as inhalation, skin and eye contact.

The steps to use the anti-silicone product are as follows:

1. Set up the car in a well-ventilated, shady place, and place a cardboard sheet or drop cloth under the car to protect the floor from the dripping chemical.

2. Wipe the surface to be painted with a damp cloth to remove dust, dirt and grease. If necessary, use a plastic blade or a clay bar to scrape off the stubborn contaminants.

3. Shake the bottle containing the anti-silicone product and spray the product on the surface to be painted evenly, about 20-30 cm away. Let the product work for a few minutes, then wipe it off with a clean, dry cloth. Repeat the treatment if necessary.

4. Check that the surface is completely clean and dry. If not, repeat step 3 until the cloth remains clean. If yes, you can continue painting as usual.