2 in 1 Car-Rep Grey Touch-Up Primer Pen with Brush (12 ml)

Car-Rep Grey Touch-Up Primer Pen with Brush 12 ml

The Car-Rep Grey Touch-Up Primer is a practical 12 ml primer designed for preparing small stone chips, scratches and minor paint damage before applying touch-up paint. It is particularly useful when bare metal or plastic is visible in the damaged area.

The convenient 2 in 1 touch-up applicator offers two application methods: the fine tip is ideal for very small stone chips and narrow scratches, while the integrated brush is suitable for larger chips and areas of missing paint.

The grey primer creates a uniform base for the colour coat, offers good filling properties and can be lightly sanded after drying if necessary. It is compatible with all automotive paints sold by us, making it suitable for use underneath all touch-up paints and automotive colour coatings available in our range.

What can it be used for?

• Priming stone chips
• Preparing small scratches and areas of paint damage for repair
• Priming exposed metal surfaces
• Minor repairs on suitable plastic surfaces
• Small local automotive body repairs
• Creating a uniform base before applying touch-up paint

Main benefits

• Easy-to-use touch-up primer
• Practical 12 ml package
• Fine applicator tip and brush in one product
• Designed for small paint damage and stone chips
• Good filling properties
• Forms a hard and durable coating
• Suitable for metal and many hard plastic surfaces
• Suitable for indoor and outdoor use
• Compatible with all automotive paints sold by us
• Touch-dry in approximately 30 minutes

Instructions for use

No spray gun or special painting equipment is required. Small repairs can be prepared easily at home by following the steps below.

1. Clean the damaged area.
   Remove dirt, wax, grease and other contamination from the area to be repaired. The surface must be completely dry.
2. Remove any rust first.
   Do not apply the primer over loose rust or peeling paint. If necessary, lightly sand the damaged area, then clean it again.
3. Shake the bottle thoroughly.
   Shake well before use to mix the primer properly.
4. Choose the appropriate applicator.
   Use the fine tip for very small stone chips and narrow scratches. Use the integrated brush for larger chips, scratches or areas where more paint is missing.
5. Apply a thin coat of primer.
   Cover only the damaged area. Do not apply too much material at once. A thin and even coat gives a better result than one heavy coat.
6. Allow the primer to dry.
   At approximately 20°C, the primer is touch-dry after about 30 minutes. Full drying takes approximately 24 hours.
7. Sand lightly if necessary.
   If the primed area is uneven, it can be lightly sanded after it has dried. Remove all sanding dust before applying paint.
8. Apply the touch-up paint.
   Once the primer has dried, apply the correct colour touch-up paint. The primer is compatible with all automotive paints sold by us.

Fine tip or brush?

Product information

Important information

• Always apply the primer to a clean, dry and grease-free surface.
• Remove loose rust and peeling paint before application.
• For the best result, apply a thin coat rather than one excessively thick coat.
• Apply the colour coat only after the primer has dried properly.
• Compatible with all automotive paints sold by us.