Epoxy Primer FP400 DTM Valspar Industrial Mix (5l) Grey

Product Description: FP400/401 is a 2K Epoxy corrosion protection primer DTM (direct to metal) with excellent adhesion properties. This Epoxy primer has excellent air- and force dry capabilities. FP400/401 can be used as wet on wet and for higher thicknesses of up to 120µm. Epoxy primer needs recoating with Topcoat. It is possible to add 5% color toner to FP401 Epoxy Primer white to tint.

Preparation: For more detailed information go-to TI-Substrate and Pre-treatment on Colour Retrieval System (CRS) or website www.valsparindustrialmix.com.

Substrates: Iron, steel, stainless steel (blasted), cast iron, galvanized steel, aluminum, glass fiber reinforced plastics.

Other: Solvent resistant surfaces, cleaned/sanded/hardened original and cured coatings.

Iron/steel: Abrasive shot blasting is recommended or dry sanding P80 – P180

Aluminum: P180 – P240 Galvanized: Sweep blasting recommended

Paint finishes: P240 – P320 (Please, check and change abrasive paper regularly as required)

Cleaning: Surface must be dry and free from any contamination, e.g. oil, grease & release agents. Use RS405 Epoxy Reducer, RS605/607/609 Universal Reducer for metal substrate or AD690 Solvent Degreaser for metal substrate/paint finishes.