Spralac SP5589 2K Epoxy Primer Set 1:1 White (2l)

Spralac SP5589 2K Epoxy Primer Set 1:1 White  (2l)

Description
Spralac SP 5589 Epoxy Primer White 1:1 is a high-filling Epoxy Primer with good resistance to chemicals and is easy to spray with the simple mixing ratio. 

Mixing
Sanding: 1 : 1 Primer : Hardener Non-Sanding: 1 : 1 Primer : Hardener  (SP2899 Epoxy Primer Hardener inc.)

Surface Preparation
Cleaning: Clean with SP6499 Silicone Remover by using wipe on/wipe off method.
Sanding: Sand surface thoroughly with P180 dry discs. For preparation of E-coat and OEM finishes sand with P240 dry discs or scuffing pad.
Cleaning: After preparation of substrate repeat cleaning procedure.
Mask entire vehicle to eliminate unwanted overspray. 

Gun Setup
HVLP >> Nozzle: 1,3-1,5 Air Pressure (BAR / PSI): 2 / 29
HE >> Nozzle: 1,3-1,5 Air Pressure (BAR / PSI): 1,8-2,0/26-29
Airless / Airmix >> Nozzle: 0,009-0,011”/40° Air Pressure (BAR / PSI): 160-200/2100-2900

Application
Sanding: 1 - 2 coat 30 - 60 µm (1,2-2,4 mil)
Non-Sanding: 1 coat 30 µm (1,2 mil)

Flash Off and Dry Times

AIR DRY 20°C / 68°F
Flash off: 10 - 20 minutes
Dust free: 45 minutes
Dry to handle: 16 hours
Dry to tape: 16 hours
Dry to sand: 16 hours

FORCED DRY 60°C / 140°F
Flash off: 10 - 20 minutes
Dust free: -
Dry to handle: 60 minutes
Dry to tape: 60 minutes
Dry to sand: 60 minutes

Flash off times for wet-on-wet application minimum 60 minutes

POT LIFE AT 20°C (68°F)
24 hour

Substrates
Cured and sanded old paint systems on: Metal, (Steel-zinc-aluminium) or sanded polyester. 

VOC Code 2004/42/IIB(c)(540)540