IMPA KELA RUST 1412 Rust Converter 200ml – Paintable Anti-Corrosion

Rust Converter – Rust Inhibitor (0.2 L) – IMPA 1412 KELA RUST

KELA RUST is a milky liquid rust converter that creates a stable anti-corrosion barrier in one step—ideal for areas where rust cannot be removed mechanically. When it reacts with rust, it forms a very stable organic metal complex that adheres strongly to steel and helps stop further corrosion.

It can be applied by brush, roller or spray and can also be used on a damp surface. After drying, the treated surface is paintable, providing an excellent base for subsequent coatings (topcoats, anti-corrosion systems). Recommended for automotive use on body panels and underbody areas.

Benefits & features

• High-performance rust conversion with deep penetration
• Actively converts rust into a strong, stable organic iron complex
• After drying, forms a blue-black protective barrier that limits oxygen and moisture ingress
• Paintable after curing—creates a solid base for further coatings
• Ready to use; if needed, can be thinned with water only
• No solvents allowed (do not use any type of solvent)
• Lead-, zinc- and chromium-free
• Suitable for hard-to-reach areas where mechanical rust removal is not possible

Product information

Pack contains: 1 pc rust converter (200 ml).

Where to use

Automotive and industrial applications where rust must be chemically stopped and converted because it cannot be removed mechanically—seams, edges, overlaps and hard-to-reach areas.

Application – step by step

• Surface prep: remove oil/grease, loose rust flakes and scale. If exposed to salts/chemicals, rinse with water before application.
• Damp surfaces: can be applied on a damp surface.
• Application: brush, roller, spray bottle or spray gun.
• Thinning: ready to use; thin with water only if needed. Do not use solvents.
• Film build: apply according to rust thickness—avoid runs.
• Drying time (20°C): approx. 30 minutes (air dry).
• Overcoating: minimum 3 hours. Do not paint before the conversion reaction is complete.
• Best performance: the product needs some humidity; applying in the evening and painting next morning can be beneficial.
• Visual check: rusted areas should turn blue-black.
• Painting window: can be overcoated with most paint systems within 6–7 days after treatment.

Spray gun settings (if spraying)

Also easy to apply by brush or roller.

Critical notes

• Do not apply in direct sun or on hot metal. Fast drying can reduce conversion quality.
• Do not paint before the reaction has fully completed (typically ~3 hours under normal conditions).
• Solvents are forbidden—thin with water only if needed.
• Do not use metal containers/tools, and do not pour unused product back into the original container (may harden).
• Frost sensitive! Recommended storage: +5 to +10°C.

Safety & cleanup

• PPE: wear gloves and eye protection; ensure adequate ventilation in enclosed areas.
• Tool cleanup: clean tools with water after use (no solvent use).
• Test first: on critical systems or unknown substrates, do a small test to confirm compatibility.