NOVOL Structure Topcoat Acrylic Spray - Anthracite (500ml)

NOVOL Structure Topcoat Acrylic Spray - Anthracite (500ml)

NOVOL Structure Topcoat is a fast-drying decorative acrylic coating with very good covering properties. It creates a fine-grained texture that imitates plastic, making it suitable for repair and refinishing work where both surface protection and an original structured appearance are required.

The product can be applied to wood, metal and aluminium surfaces, as well as to old paint coatings and polyester laminates. The coating dries quickly, offers very good hiding power and helps protect the treated surface against fading and weather conditions.

The FAN nozzle provides a more even spray pattern than a standard aerosol nozzle, with application properties similar to a conventional spray gun. This helps achieve controlled and uniform application. Structure Topcoat is especially useful on surfaces where restoring or imitating a factory-like plastic texture is important.

The product is available in black and anthracite colour versions, making it suitable for different repair tasks and surface finishes.

Main benefits

• Fast-drying decorative acrylic coating
• Creates a fine-grained texture imitating plastic
• Very good hiding properties
• Suitable for wood, metal and aluminium surfaces
• Can be used on old paint coatings and polyester laminates
• Helps protect the surface against fading and weather conditions
• Equipped with a FAN nozzle for more even application
• Drying time: approx. 2 hours at 20 °C
• Available in black and anthracite colour versions
• Practical 500 ml aerosol packaging

Product information

Suitable substrates

Application data

Application instructions

1. Surface preparation: the surface must be clean, dry and degreased.
2. Shaking: shake the can thoroughly for at least 2 minutes before use.
3. Application: apply the coating in 1–2 even coats.
4. Flash-off between coats: allow 5–10 minutes between coats.
5. Drying: the coating dries in approx. 2 hours at 20 °C.
6. Valve cleaning: after use, turn the can upside down and spray for approx. 5 seconds until the valve is clear.

Usage tips

• The product is especially useful on surfaces where a plastic-like texture is required.
• Apply evenly to achieve the desired structure and hiding power.
• Proper surface preparation is especially important when recoating old coatings.
• The coating provides not only a decorative finish but also improved resistance to weathering.
• Always perform a test spray before use.
• Always clean the valve after use.

Important information

• NOVOL Structure Topcoat is a fast-drying decorative acrylic coating spray.
• The coating creates a fine-grained, plastic-like texture.
• Suitable for wood, metal, aluminium, old coatings and polyester laminates.
• The FAN nozzle makes even application easier.
• Provides protection against weather conditions and fading.
• The safety data sheet and workplace safety regulations must be followed.