Novol Cavity Wax Cavity Protection Spray - Clear (500ml)

Novol Cavity Wax Cavity Protection Spray - Clear (500ml)

Novol Cavity Wax is a professional cavity protection spray developed for corrosion protection of body cavities, closed profiles, rocker panels, door reinforcement profiles, body bars and hard-to-reach internal surfaces. Its anti-corrosion wax and lanolin-based formula creates an effective protective layer against water, salt, moisture and atmospheric factors.

Thanks to its excellent penetrating properties, Cavity Wax creeps deep into gaps, joints, profiles and fissures, where it forms a flexible and tight protective film. This is especially important in body areas where moisture and contamination can remain for a longer time and may eventually lead to corrosion.

The product has very good moisture-displacing properties, helping to remove humidity from the substrate before creating long-lasting protection on the treated surface. It is recommended after repair work, during restoration, as preventive corrosion protection, and for internal areas of body parts that are difficult to reach with conventional methods.

Main benefits

• Anti-corrosion wax and lanolin-based formula
• Developed specifically for body cavities and closed profiles
• Excellent penetration into gaps, joints and profiles
• Forms a flexible and tight protective film on the treated surface
• Efficiently repels and displaces moisture from the substrate
• Protects against water, salt and atmospheric factors
• Resistant to weak acids and bases
• Ideal for rocker panels, door reinforcement profiles, body bars and internal cavities
• Practical 500 ml aerosol packaging
• Can be applied with an adapter for hard-to-reach cavities

Product information

Colours and article numbers

Area of use

Application instructions

1. Preparation: the cavity, profile or internal surface to be treated should be as clean, dry and free from loose contamination as possible.
2. Shaking: shake the can thoroughly for at least 2 minutes before use.
3. Adapter use: apply the cavity protection material into gaps, profiles and closed body cavities using the adapter.
4. Application: distribute the product evenly inside the cavity so that the wax can spread properly and form a protective film.
5. Valve cleaning: after use, turn the can upside down and spray for approx. 5 seconds until the valve is clear.

Application data

Usage tips

• Use the product primarily for internal corrosion protection of closed body cavities.
• The long adapter helps deliver the wax deep into profiles and gaps.
• For proper protection, the wax must reach the internal surfaces evenly.
• After restoration or body repair, re-treatment of internal cavities is especially recommended.
• Always clean the valve after use so that the can remains usable later.
• Always perform a test spray and follow the safety data sheet instructions.