ProSpray Clear Coats

ProSpray 2K clear coats for professional refinishing

ProSpray 2K clear coats are two-component clear finishes developed for professional automotive repair and refinishing. The range includes both MS and HS systems, allowing the clear coat to be matched to repair size, application requirements and the desired final finish.

ProSpray clear coats are designed to produce a durable high-gloss top layer and can be used for anything from smaller repairs to larger refinishing jobs when applied according to the product instructions.

ProSpray ICC-6000 2K MS Clear

ProSpray ICC-6000 is a 2K MS clear coat for professional repair and refinishing applications. Its MS formulation provides balanced application characteristics for general bodyshop use and a range of repair sizes.

Always use the specified hardener, thinning method, coat structure and drying conditions for the individual system.

ProSpray ICC-8000 2K Multi HS Clear

ProSpray ICC-8000 Multi HS is a high-solids two-component clear coat designed for good flow, high gloss and a durable finish. It can be used for both individual panel repairs and larger refinishing work.

The system uses a 2:1 mixing ratio and can be applied using one-coat or two-coat techniques when the specified viscosity and application conditions are followed.

High gloss and durable clear coat protection

ProSpray HS clear coat systems are designed to create an even, high-gloss finish with good flow. ICC-8000 also contains UV filtering and absorbing components intended to support the long-term appearance of the finished coating.

Final performance always depends on the complete refinishing system, correct surface preparation, mixing, application and curing.

MS or HS ProSpray clear coat?

An MS clear can be a practical choice for general refinishing work and traditional application characteristics. An HS system may be more suitable when higher solids, greater film build and a premium high-gloss finish are required.

Do not choose by the MS or HS designation alone. Repair size, workshop temperature, drying method and required process speed should also be considered.

ProSpray clear coat and hardener

ProSpray 2K clear coats must be mixed with the correct hardener specified for the individual system. Once mixed, chemical curing begins and the material has a limited pot life.

ICC-8000 is available with normal and fast hardener options. Select the hardener according to repair size, ambient temperature and the required drying speed.

From panel repair to full refinishing

One of the strengths of the ProSpray Multi HS system is its flexibility. With the correct application setup, it can be used for individual panel repair as well as larger or full refinishing jobs.

On larger areas, selecting the correct hardener speed and providing sufficient working time are especially important for even flow and a consistent gloss finish.

Polishing ProSpray clear coat

After sufficient curing, high-gloss 2K clear coat can generally be refined by fine sanding and polishing where permitted by the specific product instructions.

When correcting dust inclusions or minor surface defects, allow the clear coat to cure properly and use a sanding and polishing process appropriate for the condition of the film.

Frequently Asked Questions about ProSpray clear coats