Car-Rep Paint & Varnish Remover Spray 400 ml

Car-Rep Paint & Varnish Remover Spray 400 ml

Car-Rep Paint Remover is a highly effective, gel-structured paint and varnish remover spray suitable for removing most types of coatings.

Its non-drip gel formula adheres well to the treated surface, making it easier to use even on vertical areas. It softens old paint and varnish layers so they can be removed mechanically after the appropriate reaction time.

The aerosol provides an approximately 7–8 cm wide spray pattern for fast and even application.

Applications

• Removing old paint coatings
• Softening and removing varnish
• Surface preparation before refinishing
• Use on metal and other compatible surfaces
• Removing stubborn old coatings

Main benefits

• High paint and varnish removing power
• Non-drip gel structure
• Suitable for vertical surfaces
• Fast 5–15 minute reaction time
• Approx. 7–8 cm wide spray pattern
• Easy aerosol application
• Softened coating can be removed with a scraper

Product information

Instructions for use

1. Check surface compatibility.
   Always test the product first on a small, preferably inconspicuous area. The remover may damage some materials, particularly certain plastics.
2. Shake the aerosol thoroughly.
   Shake well before application.
3. Spray onto the coating.
   Apply an even layer over the paint or varnish to be removed.
4. Allow to react for 5–15 minutes.
   The required reaction time depends on the type, thickness and age of the coating.
5. Remove the softened coating.
   Use a suitable scraper to remove the softened paint or varnish.
6. Repeat if necessary.
   Thick or multi-layer coatings may require additional treatment.

Important information

• May damage plastic surfaces. Always perform a compatibility test first.
• Use suitable personal protective equipment.
• Use in a well-ventilated area.
• Reaction time depends on the type and age of the coating.
• Contaminated paint-removal waste should be treated as chemical waste.