RAL 3002 Acyl Spray (400ml)

RAL 3002 Acyl Spray  (400ml)

An Acrylic Touch Up Paint formulated with acrylic resins for fast drying with an excellent surface finish. Can be used on a variety of surfaces, particularly metals, in diverse areas of activity such as touching-up paintwork on agricultural machinery or construction plant, fencing, industrial maintenance and paint repairs, and to identify pipework (RAL safety and warning references).

PROPERTIES

• Rapid drying
• Easy to apply, both a first coat additional coats as required
• Particularly good covering power
• A very flexible paint film with a superb gloss finish
• Long-lasting even outdoors
• Good adhesion to a range of different surfaces
•Touch dry (ASTMD-1640 ISO 1517): 10 to 15 minutes
• Completely dry (ASTMD-1640 ISO 1517): 12 hours
• Temperature resistance: 120°C
• Leave to dry for 15 minutes between coats
• Dry film thickness: 15μ/coat

SPECIFICATIONS

Composition
Binder: acrylic
Solvent: blend of solvents, free from lead and
heavy metals
Propellant: dimethyl ether

INSTRUCTIONS FOR USE

• Thoroughly shake the aerosol for at least 2 minutes before use to ensure the pigments are correctly mixed. The surface must be clean, dry and free from grease. Degrease the surface to be treated, remove rust and dust.
• To improve adhesion, it is recommended to apply an undercoat prior to use, depending on the condition of the surface to be treated.
• Spray at a distance of 25 cm from the surface. Best results are obtained by applying several thin coats in different directions rather than a single thick coat. Coverage approximately 2m2 per can according to the application conditions and the state of the surface to be treated.
• If appropriate, carry out a test on an unobtrusive area beforehand to verify the compatibility of the paint with the surface.