Car-Rep RAL1001 Beige Vinyl Spray (400 ml)

Car-Rep RAL1001 Beige Vinyl Interior & Leather Renovation Spray 400 ml

Car-Rep Vinyl RAL1001 Beige is a flexible spray paint specially developed for renovating, repairing and recolouring automotive interior surfaces. It is designed for vinyl, leather and synthetic leather surfaces and is ideal for dashboards, door panels, seats, centre consoles, gear gaiters and other interior trim parts.

The special formula contains a built-in adhesion promoter, so no separate primer is required on properly prepared surfaces. The coating flows evenly and forms a smooth, durable and flexible finish that does not crack, peel or flake under normal use.

The final finish is semi-gloss in RAL1001 Beige. It is especially suitable for restoring worn, faded or discoloured interior components and giving them a clean, uniform appearance.

What can it be used for?

• Renovating vinyl and suitable leather car seats
• Painting and restoring dashboards
• Door panels and interior door trims
• Centre consoles
• Gear gaiters and interior trim parts
• Recolouring vinyl and synthetic leather surfaces
• Restoring worn or faded automotive interior parts

Main benefits

• Specially developed for automotive vinyl, leather and synthetic leather surfaces
• Built-in adhesion promoter
• No separate primer required on properly prepared surfaces
• Forms a permanently flexible coating
• Does not crack, peel or flake under normal use
• Flows quickly and evenly
• Produces a smooth semi-gloss finish
• Fast drying
• Heat resistant up to +150°C
• Easy aerosol application

Product information

Simple instructions for use

1. Clean the surface thoroughly.
   Remove all dust, grease, silicone, wax, care products and other contamination. The surface must be completely clean and dry.
2. Matt old or damaged surfaces if necessary.
   If the surface is glossy, damaged or previously painted, lightly sanding it can improve adhesion. Clean the surface thoroughly again after sanding.
3. Carry out a test spray.
   On unknown materials or previously coated surfaces, first check adhesion and compatibility in an inconspicuous area.
4. Shake the can thoroughly.
   After the mixing ball becomes audible, shake the can vigorously for approximately 3 minutes. Shake occasionally during use as well.
5. Apply in thin coats.
   Hold the can approximately 20–25 cm from the surface and spray using continuous, even movements.
6. Apply 2 thin coats.
   A coat that is too thick may run or dry unevenly. Allow approximately 5 minutes between coats.
7. Allow the coating to cure completely.
   The paint is dust-dry after approx. 20 minutes, touch-dry after approx. 30 minutes and can be handled carefully after approx. 60 minutes. Final hardness is reached after approx. 24 hours.
8. Clean the valve after use.
   After use, turn the can upside down and spray for approx. 5 seconds until the valve is clear.

Leather Seat Renovation with Car-Rep Vinyl Spray

The video demonstrates the practical application of Car-Rep Vinyl Spray when renovating automotive leather and vinyl interior surfaces.

Important information

• A completely clean and grease-free surface is essential for a durable result.
• No separate primer is required on properly prepared surfaces.
• Always perform a test spray on unknown plastics, leather or existing coatings.
• Several thin coats provide a more even result than one heavy coat.
• Do not subject the painted surface to heavy use or intensive cleaning until it has fully cured.