NOVOL PROTECT 310 Acrylic Filler Primer 4+1 HS P1 White

NOVOL PROTECT 310 Acrylic Filler Primer 4+1 HS

NOVOL PROTECT 310 is an acrylic resin-based, high-build 4+1 HS filler primer developed for body repair and paint preparation work. Thanks to its high spray viscosity, it can also be applied in thick layers, making it especially suitable for correcting larger scratches, sanding marks and surface irregularities.

The product provides very good adhesion to various substrates, is easy to sand and creates a stable base for subsequent paint layers. Thanks to high-quality resins and special additives, it provides good corrosion protection and isolates polyester materials, such as body fillers, from topcoats.

PROTECT 310 is available in three colours: white, grey and black. By mixing the white and black versions, different grey shades can be produced, allowing the repair to be better matched to the topcoat colour.

Main benefits

• HS acrylic filler primer with 4+1 mixing ratio
• High filling power for larger scratches and surface irregularities
• Can be applied in thick layers
• Good adhesion to different substrates
• Easy to sand, both dry and wet
• Provides good corrosion protection
• Isolates polyester materials from topcoats
• Available in white, grey and black
• Grey shades can be produced by mixing the white and black versions
• Can be used as a filler and as a primer version

Product information

Suitable substrates

• Old paint coatings, including thermoplastic paint coatings
• Surfaces repaired with polyester putties
• Epoxy primers
• Steel
• Wash primers, after drying
• Plastic surfaces with proper preparation
• Polyester laminates

Surface preparation

Application

THIN 850 thinner selection

Drying and sanding

• Drying at 20°C: approx. 3 hours.
• Drying at 60°C: approx. 30 minutes.
• IR drying: 10–20 minutes, depending on lamp type and power.
• IR use: infrared heating may be started no earlier than 10 minutes after the final coat has been applied.
• Dry sanding: P360–P500.
• Wet sanding: P600–P1000.

Related products

• NOVOL H 5520 hardener – Standard or Fast
• NOVOL THIN 850 acrylic thinner – Fast, Standard or Slow
• NOVOL PLUS 770 flexibilising additive
• NOVOL PLUS 750 acrylic accelerator additive
• NOVOL PLUS 760 antisilicone additive

Important information

• PROTECT 310 must only be used with NOVOL H 5520 hardener.
• Using a different hardener may reduce corrosion protection and the chemical and mechanical resistance of the filler primer.
• Accurate component dosing is required to achieve the correct technical parameters.
• On plastic surfaces, use of a suitable adhesion promoter and, if necessary, a flexibilising additive is recommended.
• Use THIN 850 acrylic thinner or NC solvent for cleaning tools.
• Store the product in a cool, dry room, away from sources of fire and heat, and protected from direct sunlight.
• The safety data sheet and workplace safety regulations must be followed.