NOVOL PROTECT 330 TRIO Acrylic Filler Primer 5+1 P5 Black

NOVOL PROTECT 330 5+1 TRIO Acrylic Filler Primer

NOVOL PROTECT 330 5+1 TRIO is a professional acrylic filler primer for body repair and paint preparation work. Thanks to high-quality resins and special additives, it provides good corrosion protection and isolates polyester materials, such as body fillers, from topcoats.

The product provides excellent adhesion to most properly prepared substrates. Even when applied in thicker layers, it levels smoothly and forms a hard, stable yet easy-to-sand layer. It can be used as a conventional filler primer, as an insulating primer and in wet-on-wet systems.

PROTECT 330 is available in three colours: white, grey and black. By mixing the colours in the correct proportions, a primer shade can be created to help optimise the hiding properties of the topcoat.

Main benefits

• Acrylic filler primer with 5+1 mixing ratio
• Can be used as a filler, primer and wet-on-wet version
• Provides good corrosion protection
• Isolates polyester materials from topcoats
• Excellent adhesion to different substrates
• Levels smoothly even in thicker layers
• Forms a hard, stable yet easy-to-sand layer
• Can be sanded dry and wet
• Available in white, grey and black
• Colour mixing helps optimise the hiding properties of the topcoat

Product information

Suitable substrates

• Old paint coatings, including thermoplastic paint coatings
• Surfaces repaired with polyester putties
• Epoxy primers
• Steel
• Wash primers, after drying
• Plastic surfaces with proper preparation
• Polyester laminates

Surface preparation

Mixing ratios

The thinner quantity must always be calculated according to the selected application mode. Accurate component dosing is required to achieve the correct technical parameters.

Application

THIN 850 thinner selection

Drying and sanding

• Drying at 20°C: approx. 3 hours.
• Drying at 60°C: approx. 30 minutes.
• IR drying: 10–20 minutes, depending on lamp type and power.
• IR use: infrared heating may be started no earlier than 10 minutes after the final coat has been applied.
• Dry sanding: P360–P500.
• Wet sanding: P600–P1000.

Related products

• NOVOL H 5520 hardener – Standard or Fast
• NOVOL THIN 850 acrylic thinner – Fast, Standard or Slow
• NOVOL PLUS 770 flexibilising additive
• NOVOL PLUS 750 acrylic accelerator additive
• NOVOL PLUS 760 antisilicone additive

Important information

• PROTECT 330 must only be used with NOVOL H 5520 hardener.
• Using a different hardener may reduce corrosion protection and the chemical and mechanical resistance of the filler primer.
• Accurate component dosing is required to achieve the correct technical parameters.
• On plastic surfaces, use of a suitable adhesion promoter and, if necessary, a flexibilising additive is recommended.
• Use THIN 850 acrylic thinner or NC solvent for cleaning tools.
• Store the product in a cool, dry room, away from sources of fire and heat, and protected from direct sunlight.
• The safety data sheet and workplace safety regulations must be followed.