NOVOL PROTECT 330 5+1 TRIO Acrylic Filler Primer is a versatile, easy-sanding primer for body repair and paint preparation work. It can be used as a filler primer, insulating primer and in wet-on-wet systems. It provides good adhesion, corrosion protection and a stable base for subsequent paint layers.
Fast delivery & pickup
MPL Courier
10.20.–10.27.
1,430 Ft
GLS Courier
10.20.–10.22.
2,530 Ft
MPL Parcel Point
10.20.–10.27.
1,250 Ft
GLS Parcel Point
10.20.–10.22.
1,690 Ft
NOVOL PROTECT 330 5+1 TRIO is a professional acrylic filler primer for body repair and paint preparation work. Thanks to high-quality resins and special additives, it provides good corrosion protection and isolates polyester materials, such as body fillers, from topcoats.
The product provides excellent adhesion to most properly prepared substrates. Even when applied in thicker layers, it levels smoothly and forms a hard, stable yet easy-to-sand layer. It can be used as a conventional filler primer, as an insulating primer and in wet-on-wet systems.
PROTECT 330 is available in three colours: white, grey and black. By mixing the colours in the correct proportions, a primer shade can be created to help optimise the hiding properties of the topcoat.
| Product type | Acrylic filler primer |
| Mixing ratio | 5:1 with H 5520 hardener |
| Thinner | THIN 850 acrylic thinner |
| Filler version | 5:1 + 15% THIN 850 |
| Primer version | 5:1 + 40% THIN 850 |
| Wet-on-wet version | 5:1 + 60% THIN 850 |
| Viscosity | Filler: 50–80 s, primer: 25–35 s, wet-on-wet: 16–20 s DIN 4 / 20°C |
| VOC content | Filler: 510 g/l, primer: 570 g/l, wet-on-wet: 600 g/l in ready-to-use mixture |
| Application conditions | Above 15°C and up to 80% humidity |
| Number of coats | 1–3 coats |
| Dry film thickness per coat | Filler: 40–60 μm, primer: 30–50 μm, wet-on-wet: 20–30 μm |
| Coverage | Filler: 4.3 m²/l at 100 μm, primer: 7.9 m²/l at 50 μm, wet-on-wet: 11.7 m²/l at 30 μm |
| Pot life | Approx. 1 hour at 20°C |
| Flash-off between coats | 5–10 minutes at 20°C |
| Drying | 3 hours at 20°C, or 30 minutes at 60°C |
| IR drying | 10–20 minutes, depending on lamp type and power |
| Sanding | Dry: P360–P500, wet: P600–P1000 |
| Colours | White, grey, black |
| Shelf life | PROTECT 330: 24 months at 20°C |
| Old paint coating | Degrease, dry sand with P220–P280, remove dust and degrease again |
| Polyester putty | Dry sand, use P240–P320 for final sanding, remove dust and degrease |
| Epoxy primer | Within 48 hours without sanding; after 48 hours dry sand with P320, remove dust and degrease |
| Steel | Degrease and dry sand with P120 |
| Wash primer | Apply after drying |
| Plastic | Degrease with PLUS 780 silicone remover, matt with an abrasive pad, remove dust, degrease again and apply PLUS 700 adhesion promoter. If necessary, use PLUS 770 flexibilising additive. |
| Polyester laminate | Degrease, dry sand with P280, remove dust and degrease again |
| Application mode | Volume ratio | Weight ratio | Viscosity |
|---|---|---|---|
| Filler version | 5 : 1 + 15% THIN 850 | 100 : 13 : 9 | 50–80 s DIN 4 / 20°C |
| Primer version | 5 : 1 + 40% THIN 850 | 100 : 13 : 23 | 25–35 s DIN 4 / 20°C |
| Wet-on-wet version | 5 : 1 + 60% THIN 850 | 100 : 13 : 35 | 16–20 s DIN 4 / 20°C |
The thinner quantity must always be calculated according to the selected application mode. Accurate component dosing is required to achieve the correct technical parameters.
| Conventional gravity-feed spray gun | Filler/primer: 1.6–1.8 mm, wet-on-wet: 1.2–1.4 mm; pressure: 3–4 bar; distance: 15–20 cm |
| HVLP / low-pressure gravity-feed spray gun | Filler/primer: 1.6–1.7 mm, wet-on-wet: 1.4–1.6 mm; pressure: 2 bar; distance: 10–15 cm |
| Number of coats | 1–3 coats |
| Flash-off between coats | 5–10 minutes at 20°C |
| Repair size | 15–20°C | 20–25°C | 25–35°C |
|---|---|---|---|
| Small repair, 1–2 panels, spot repair | THIN 850 Fast | THIN 850 Fast | THIN 850 Standard |
| Medium repair, 3–5 panels | THIN 850 Fast / Standard | THIN 850 Standard | THIN 850 Slow |
| Large repair, more than 5 panels | THIN 850 Standard / Slow | THIN 850 Slow | THIN 850 Slow |
Pontos és gyors szállítás, színhelyes javítófesték. Az extra csomagot választottam és a javítást így könnyedén megoldottam. Csak ajánlani tudom.
Korrekt üzlet, gyors szállítás!
Többször rendeltem tőlük már, mindig azt kaptam, amire számítottam. Minden rendben szokott menni, a csomag gyorsan megérkezik. Az emailes automata tájékoztatások is megfelelőek.
Nagyon korrekt csapat, mindenkérdésemet megválaszolták, kéréseimet teljesitették.
Szuper bolt ! jó társaság mindekinek ajánlom.
Gyors korrekt kiszolgálás, ja meg még kutyabarát hely is.
Szuper gyors szállítás, a termékekkel is minden rendben volt. Könnyen kezelhető weboldal. Maximálisan elégedett vagyok.
Szerintem jó.
Szakszerűség, gyorsaság, hihátlan teljesítés. Hozzáértő, segítőkész vevőszolgálat.
Gyors szállítás, rugalmas ügyintézés.
A webshop jól és egyszerüen használható, a megrendelés általában egy napon belül átvehetö volt az átvétel is gyorsan ment.
Jó kiszolgálás. Jó fejek
Please sign in first.
Sign inCreate a free account to save loved items.
Sign inCreate a free account to use wishlists.
Sign in
English
Magyar
&media=https://www.carcolor.hu/shop/17812-large_default/2k-spraymax-hs-filler-spray-grey-400ml.jpg){kind=link}
&media=https://www.carcolor.hu/shop/17767-large_default/spectral-under-335-2k-acrylic-filler-primer-35l.jpg){kind=link}
&media=https://www.carcolor.hu/shop/17025-large_default/2k-us-acryl-primer-filler-set-41-black-125l.jpg){kind=link}
&media=https://www.carcolor.hu/shop/17022-large_default/2k-us-acryl-primer-filler-set-41-white-125l.jpg){kind=link}
&media=https://www.carcolor.hu/shop/16331-large_default/2k-us-acryl-primer-filler-set-41-grey-5l.jpg){kind=link}
&media=https://www.carcolor.hu/shop/17023-large_default/2k-us-acryl-primer-filler-set-41-grey-125l.jpg){kind=link}